How to choose gloves or mittens for alpine skiing and snowboarding. Preparing a sled in the summer: gloves for snowboarding, alpine skiing and snow skiing Cut and useful details in gloves for alpine skiing

The equipment of a skier or snowboarder requires the presence of gloves or mittens. At the same time, there are quite a lot of options for choosing a model. And there are also several approaches to choosing. To begin with, we list all the options for gloves that may be suitable in one way or another for active recreation in the mountains:

Classic ski gloves- articulated, insulated gloves designed specifically for alpine skiing. As a rule, they have a neat cut and include leather details. They can be with or without a membrane. There are heated options.

Sports ski gloves- specialized ski gloves with additional protection elements. Used for sport skating on slopes with poles and fans of fun carving, where it is not uncommon to touch the slope with your hand.

Snowboard gloves with protection- differ in protection elements in the wrist area. The cut may be less articulated in the toe area since snowboarders don't have to hold poles.

Universal outdoor gloves- insulated membrane gloves for various types of winter activities: mountaineering, freeride, mountain tourism. They differ from classic ski boots in a looser cut, wide and high cuffs, and the presence of a safety leash on the wrist. Sometimes they have an additional liner.

Softshell gloves- a fairly universal topic. Found in collections for running, hiking, mountaineering, and even for the city. Low moisture protection, light insulation - maximum vapor permeability. Ideal for riding at temperatures above zero and down to –5°C with low humidity.

Membrane tops- non-insulated membrane mittens or gloves. As a rule, they have an articulated cut, convenient when working with rope and ski poles. A rarity among pure ski brands, they are presented mainly in the outdoor and mountaineering collections. They can be used either independently or in combination with earbuds.

Single-layer non-insulated gloves without moisture protection. Often called liners or inserts, although they can be independent models. These are lightweight gloves for general use. They are presented in collections of running or hiking clothing. They do not have any protection against moisture. They are an addition to ski resorts. Very convenient if you like to take photos or videos on a slope. Also useful for apres-ski.

The first four types of gloves are fundamentally different in cut, but the design and properties are similar. Models may differ slightly in the degree of thermal insulation and quality of moisture protection, as well as the presence of certain parts. The next three categories are fundamentally different.

Whatever gloves you choose, you will have to come to terms with the fact that you will definitely not be able to limit yourself to one pair for absolutely all occasions. Therefore, first we will start from the prevailing weather conditions of your favorite ski resort, where you ski most often. So we will choose the type of gloves. Next, we will analyze the most important parameters and elements of gloves that are responsible for protecting our hands from various vagaries of weather - snow, wind, moisture and cold. They will be decisive in the final choice of a specific model.

Choosing gloves depending on weather conditions and type of activity

Depending on the weather conditions, you can use different gloves or combinations of them:

Dry and frosty weather - the norm for Khibiny and Siberian regions popular among freeriders, such as Sheregesh, Priiskovy and Luzhba. If you prefer to ride there during the high season, and your hands get cold relatively quickly, then well-insulated gloves or mittens would be your best choice. The presence of a membrane, despite dry weather, is also a prerequisite, as it effectively protects from wind and creates an additional vapor barrier that reduces heat loss.

Humid and warm climate characteristic, for example, of Krasnaya Polyana. Fog and a combination of rain and sleet are the norm here. In this case, hands freeze not because of low temperatures, but due to the rapid wetting of gloves and mittens. Therefore, their moisture-proof properties come to the fore here: the quality and efficiency of the membrane and the durability of the water-repellent impregnation. Look for the Gore-Tex nameplate on the gloves.

Dry and warm weather a rarity for most ski resorts. In general, this climate is typical, for example, for Gudauri. Such conditions can be “caught” at the beginning of the season in Sheregesh or Abzakovo, as well as on the sunny European alpine slopes. This weather is very comfortable for riding, and the hands require minimal protection, which softshell gloves do an excellent job of. Their light insulation is complemented by windproof properties and provides the necessary protection from uncritically low temperatures. The absence of a classic membrane allows the gloves to effectively remove moisture from the hands, preventing the inside from getting wet.

Choosing gloves depending on your riding style

Let's consider several scenarios:

Athlete- gloves with protection or classic ski models with a short cuff.

Amateur on the slopes- all options are acceptable. Everything is dictated by your ski clothing style and personal preferences. Massive gloves with large cuffs will look out of place with an elegant classic suit. At the same time, more compact gloves with a classic cut will fit more easily into small jacket pockets. A spare pair of softshells or liners is recommended.

Freerider- the optimal choice is gloves or mittens with long and wide cuffs, plus a spare pair of your choice.

Skitourist- softshell gloves and spare “2 in 1”.

Snowboarder- gloves or mittens with wrist protection. Spare pair to choose from.

Option "two in one"

Let's divide all gloves conceptually into two categories:

"Two in one"- essentially two separate pairs of gloves that can be worn together: a thin liner and an outer glove.

Single design- includes all layers: protective, insulating.

"Two in one"- outer glove and removable liner. In this case, the outer part can be insulated or, on the contrary, simply be a membrane top.

The two-in-one option is often warmer. Another advantage: the gloves dry faster, because the wet liner can always be taken out and dried separately. Therefore, if you ski in a cold region or prefer ski touring and off-piste skiing, where there is often no way to quickly dry things, choose a double design.

Non-insulated membrane gloves or mittens are called mittens. Like liner inserts, they can be used independently. This option is ideal in warm and humid weather or for ski touring/freeride. While it’s dry and warm, use only the liner; if it starts to freeze or feels damp, put on the tops. For riding in temperatures below 10 degrees, a thin insulation liner may not be enough.

Scott insulated gloves were sold with a thin liner. Both pairs of gloves included in the kit can be used independently. Arcteryx blue membrane non-insulated gloves were sold without liner. You can use them independently or purchase thin liner liners

Thermal insulation of ski gloves

One of the most common questions when choosing gloves: “Won’t I freeze in them?” Several factors are responsible for thermal insulation:

Quantity and quality of insulation. Most often, synthetic fibers Primaloft and Thinsulate act as insulation - with a small volume, they insulate heat well, dry quickly and continue to warm even when wet.

Presence of membrane. It prevents wind cooling and also creates an additional vapor barrier, which slightly reduces heat loss.

Glove material. Leather gloves and mittens are usually warmer than similar ones made from synthetics.

There are gloves without any insulation at all, which are designed for riding in warm weather. These include membrane gloves and mittens, as well as lightweight softshell gloves. They protect your hands from the wind, and, as a rule, this is more than enough during spring and summer glacial skating.

But whether you'll get cold or not depends not only on the gloves you choose and the temperatures you plan to ride in, but also on your own sensitivity to cold. Some riders can safely ride on a frosty day wearing thin, lightly insulated gloves, while others prefer to wear warm mittens even in slight cold weather.

Mittens are noticeably warmer than gloves with the same weight and volume of insulation.

Actually, the key difference between mittens and gloves lies in the aspect of thermal insulation. The mittens are noticeably warmer with the same weight and volume of insulation. We recommend them to all skiers who cannot be stopped from skiing on the snowy slopes even by frost.

Mittens can also be recommended for riders who are particularly intolerant of the cold: after all, with frozen fingers in gloves, they are unlikely to be able to deftly handle fasteners, fastenings and equipment. As a rule, this applies to skiers - the hands of the fair sex get cold more often than those of men.

Ski mittens can be equipped with protective elements, just like gloves

If you are a supporter of exclusively gloves, then when choosing a pair for cold weather, you should maintain a reasonable compromise: the more insulation used, the lower the ergonomics of the model. A thick layer of insulation can interfere with the movements of the fingers and greatly reduce their sensitivity, which will immediately affect the ease of working with equipment - the main advantage of the cut of the gloves. Therefore, pay more attention to the fitting: evaluate how comfortable the model sits on your hand, whether it is convenient for you to fasten zippers, put on a ski pole lanyard, etc.

Of course, the choice is influenced not only by temperature and individual cold tolerance, but also by the degree of intended physical activity. So, if you prefer calm skiing on prepared slopes within the resort, then it is better to get warm gloves or mittens. Fans of ski touring and freeride are much less likely to encounter the problem of frozen hands: they have to sweat a fair amount while climbing on foot or getting out of deep snow on the descent. Therefore, the most “breathable” and lightly insulated models are more suitable for them. Although it is worth noting that they should always have a replacement pair.

For the coldest conditions, you can consider ski gloves with a built-in heating element that runs on compact batteries.

Waterproof properties of gloves

Moisture protection is a very important aspect of the design. Wet hands freeze very quickly, even if you ride in relatively warm weather. It can be humid at almost all ski resorts. Even in Sheregesh, which is associated with frost, it is quite warm in spring - the snow becomes wet and the slopes thaw. And on cold days, the snow that has settled on your gloves quickly melts in the gondola of the ski lift or at the entrance to the cafe, which is why you risk getting your hands wet.

The waterproof properties of modern gloves directly depend on the reliability of the membrane. As with the rest of the industry, the benchmark here is . However, many brands use similar materials from third-party manufacturers under their own brands. If the gloves use a membrane that is unknown to you, rely on the reputation of the manufacturer's brand and the expert opinion of the seller.

Please note that even the most reliable membrane is not a 100% guarantee of dry gloves. During the riding day, you regularly remove your gloves. By placing them on the snow or fastening them to your trousers, you risk collecting snow inside, where the warmth of your hands will quickly melt it. Snow can also get in through poorly fitting cuffs if you accidentally fall. Again, we can wear gloves on hands that are wet from snow. There are many options.

Hanging ski gloves or mittens this way during snowfall will inevitably get them wet from the inside.

In warm weather, the membrane may simply not cope with the removal of perspiration from the palm during intense physical activity and become damp. For such cases, carry a spare pair of gloves or mittens with you to keep your hands dry and warm. In warm and dry weather, softshell models are ideal as replacement ones.

I highly recommend the boot dryer *. Like other membrane items, mittens and gloves are not recommended to be dried on hot heating appliances. And if you are thoroughly wet, your mittens will not dry on their own overnight. And this is where a ski boot dryer comes to the rescue. If you buy it with a UV lamp, it will also get rid of unpleasant odors.

* Such shoe drying is necessary in every home. It dries and refreshes any shoes: sneakers, climbing shoes, cycling shoes, ski or snowboard boots. And it can be indispensable for gloves with mittens.

Material

Mittens and gloves bear a lot of hardships. They are constantly in contact with various abrasives, snow, ice, they regularly become damp, they are used to grab sharp edges, etc. It's no surprise that this piece of clothing sometimes tears and wears out faster than socks.

The strength and durability of gloves directly depend on the quality of tailoring and the properties of the materials used in their manufacture. Most often, synthetic fabrics of various qualities and genuine leather are used for their production.

From left to right: a thin liner made of lightweight textile with silicone coating for better grip on the pole, a softshell glove with a palm made of thin suede, a ski glove with a palm made of thick leather

The palm area is an important element of ski gloves or mittens. It is subject to the greatest wear and comes into contact with wet snow more often than others. To strengthen this zone, a variety of materials can be used:

Genuine Leather . High-quality thick leather is durable and very wear-resistant. Therefore, its use is still the standard solution for gloves that claim high durability. Leather has natural water-resistant properties that are easy to maintain with special impregnation creams. At the same time, it is a fairly heavy and inelastic material, from which it is quite difficult to sew truly comfortable gloves. They often don't feel comfortable enough when you first try them on and take some time to break in. Therefore, leather is most often used only as reinforcement. Gloves and mittens made entirely from this raw material are rarely found on sale.

Faux leather . In this group, materials vary greatly in composition and workmanship from manufacturer to manufacturer. But they have one thing in common: compared to genuine leather, they have less wear resistance, but are much cheaper, lighter and more elastic. Leather-like materials are also sometimes used to ensure compatibility with smartphone and tablet screens.

Nylon . The lightest and most elastic material among those presented. Alas, even relatively durable fabrics wear out quite quickly and become saturated with water in a humid climate. Therefore, completely “rag” gloves do not imply aggressive and careless use.

Separately, we note that leather gloves, for all their advantages, take longer to dry when completely wet, and if the leather is colored, they can stain light-colored clothes - be careful.

Hestra ski gloves with leather palm and model with artificial leather insert © switchbacktravel.com

Cut and useful details in ski gloves

Wide or narrow cuffs?

According to their design, gloves can be divided into two large groups:

with narrow cuff- the sleeve of the jacket is on top of the glove;

with wide cuff- the glove can be worn over the sleeve and cover up to half of the forearm.

Gloves and mittens with narrow and short cuffs are most common in the lines of ski models. They are hidden under the sleeves, which reduces the risk of melt water and wet snow getting from the jacket.

These gloves look much neater. This is important for those riders who want to look more elegant on the slopes. But when choosing such models, it is important to take into account the cut of the ski suit. Thus, some ski jackets have elastic cuffs that fit tightly to the wrist, and you are unlikely to be able to tuck gloves under them. It is also important that the sleeves of the jacket are articulated and long enough to cover the armholes of the gloves, eliminating the risk of water and snow getting in, and not riding up during active movements. Otherwise, the sleeves will slide up, exposing your wrists, which will be only slightly covered by the cuffs of the gloves.

Gloves equipped with a wide and long bell with a drawstring, which is put on and fixed over the jacket sleeve, perfectly protect your hands from snow getting inside the gloves. This is especially true when riding in powder. These gloves are easier to take off and put on again, since the cuffs do not have to be tucked under the sleeves each time.

Wide flares are also popular in ice climbing and on technical mountaineering routes where water and snow pour down from above and can get into the sleeves when the arms are raised. Keep this in mind if you plan to use the gloves for more than just skiing.

Gloves and mittens with wide and long cuffs can be worn over the jacket sleeve or tucked inside. Gloves with a short narrow cuff are intended to be used only inside the sleeve

Articulated cut

Today, almost all sportswear is designed to be articulated: with the help of a complex cut, pre-formed curves are created in the joint area, which provide the necessary freedom of movement. Such important accessories as gloves and mittens did not escape this. Here, the correct cut is even more important than in outerwear: without it, it is difficult to provide the fingers with sufficient mobility and sensitivity.

Designers set the curves in gloves in accordance with the position of the joints of the fingers; when relaxed, they are slightly bent. Thanks to their developments, the glove resembles not a flat five-fingered “cake”, but a slightly compressed hand.

An articulated cut is especially important for skiers and splitboarders. When riding or lifting, they need to hold the handles of the poles. Otherwise, in the center of the palm the fabric may gather into folds, and on the fingers, on the contrary, it may stretch, thereby interfering with a reliable and comfortable grip. Performing simple tasks like adjusting bindings, fastening boots, or finding a thermos in a backpack will also be more problematic.

The denser and thicker the gloves or mittens, the more pronounced the bend in the finger area. So, in light gloves made of softshell materials it may not be there at all, but due to greater elasticity and less thickness, working with poles will also be comfortable.

On the right glove you can see how the fingers are bent. The pair of softshell gloves in the center has a less pronounced curve, and the liners on the left have a straight cut

Snowboard gloves or mittens are a necessary part of every rider's equipment. Don't even think about taking with you the ones you usually wear in the city. You'll get them wet before you even have time to fasten the crepes on your boots. And then your hands will be wet, cold and unpleasant the entire time you ride.

Don't try to torture yourself if you can buy specialized mittens for snowboarding. They are made from several layers of material. The inner layer provides comfort, the insulation prevents your hands from freezing, and the outer layer does not allow moisture to pass through. With such accessories you can ride all day without any problems, even in the most extreme weather conditions.

Order snowboard mittens or gloves in the Trajectory online store with delivery throughout Russia and the CIS, including Minsk and Astana. We have selected for you stylish and comfortable models from proven sports brands: CELTEK, DC, BURTON, ROXY, DAINESE, DAKINE, ANALOG. The catalog includes a wide selection of men's, women's and children's gloves and mittens.

Gloves and mittens for snowboarding

Undoubtedly, these accessories are necessary for every snowboarder. The choice of a specific model depends on personal preference, favorite style and skill level. Freestylers will find mittens or gloves with short cuffs comfortable, while freeriders should choose an option with long cuffs that fasten over the sleeve.

If you like aggressive skating and dangerous tricks, it is recommended to buy models with wrist protection.

Choose: gloves or mittens

To make it easier to decide which option is more suitable, familiarize yourself with the features of each.

Pros of mittens:
Excellent heat retention;
Quickly and easily removed;

Disadvantages of mittens:
Some operations, such as tying shoelaces, may be inconvenient.

Pros of gloves:
Maximum convenient for various manipulations with clothing and objects.

Disadvantages of gloves:
A little less warm, since the fingers are separated.

Moreover, all snowboard gloves and mittens have the following features:
The products have a multi-layer design: outside material, with moisture-repellent impregnation; vapor-permeable membrane; soft inner layer; Elastic Kevlar palm pad.
Effectively retain heat without letting your hands get wet.
Special cuffs prevent snow from getting under your clothes.

Mittens and gloves with wrist/hand protection

If you want more confidence in your movements, you need maximum protection. Gloves and mittens with integrated protection will prevent injuries to the wrist joint and fractures in the “typical” location. The products fix the hand so that upon impact it does not bend at the wrong angle. At the same time, they also effectively retain heat and protect from moisture and snow.

The online store offers to buy mittens and gloves for snowboarding with delivery throughout Moscow and St. Petersburg. You will find a wide selection of accessories from the latest collections of famous brands. If you want to know more about a specific model, pay attention to the reviews on the product page. We will be glad if you share your impressions of the product.

Gloves are always perceived by athletes involved in winter sports as quality. This same fact is certainly confirmed by fans of snowboards and skis. Choosing the right and suitable pair is not as simple as it might seem initially. Despite this aspect, it is possible to choose the most suitable products to protect your hands and fingers from freezing at minimum air temperatures. Modern gloves for snowboarding and skiing are designed specifically for active skiing, successful removal of moisture, preservation of heat, and dry hands. For this reason, conventional models may not be suitable for skiing in mountainous areas, as you will see after the first few descents.

Alpine skiing and snowboarding are sports that require high-quality equipment

A responsible approach is required. Otherwise, gloves for snowboarding and alpine skiing will not meet the special expectations of an active person.

When choosing an accessory, it is advisable to focus on the following aspects:

type of accessory - gloves or mittens;
heat saving level;
external material used;
membrane;
degree of thermal insulation;
type of lining material;
features of the palm device;
wrist cuff length;
additional chips;
size and fit.

Gloves or mittens

First of all, you need to decide on the type of accessory: gloves or mittens. What is the difference between the available offers? So, gloves surprise with their dexterity, and mittens with their ability to retain heat. By carefully studying the numerous offers, you can make sure that mittens and gloves are suitable for all situations and riding conditions. Manufacturers try to use high-quality materials to create accessories, but still the difference continues to persist.

Most mittens have all your fingers in one compartment, which allows for more heat to be generated. In this case, if the finger is supposed to be separated, the amount of heat retained decreases immediately. Recently, the level of popularity of mittens has become increasingly greater compared to ordinary gloves for alpine skiing and snowboarding.

Unfortunately, sometimes mittens limit mobility, preventing active action. For example, before answering a cell phone call or buttoning up your clothes, you will need to take off your mittens and accept that your hands will be partially frozen.

If desired, you can choose three-fingered hybrids, which are also known as lobster mittens. Such models occupy a precise position between two proposals, namely mittens and gloves. Despite the fact that snowboard mittens are offered with special protection and are ideal for skiers and snowboarders with different levels of training, some athletes choose three-finger hybrids and note their benefits, functionality, and convenience.

Gloves and mittens, like other types, are made from special materials. The main task is maximum protection of hands from adverse external factors, the ability to maintain heat and dryness. For this reason, accessories must be made from high-quality materials and successfully demonstrate their properties.

Heat saving

It is best to buy gloves, as well as mittens for snowboarding and skiing, at a specialized sports store. The most basic goal of any athlete, including beginners, is to choose a model taking into account personal comfort. It is recommended to take the level of thermal savings into account. Despite numerous proposals, you need one that is suitable for a specific person.

If you plan to ride in relatively warm conditions, it is advisable to pay attention to the following criteria:

thermal savings will not necessarily be ideal;
The main task of the accessory is adequate protection from moisture.

If you plan to ride in cold areas, it is advisable to choose warmer mittens.

Each person must independently focus on the optimal level of heat savings, understanding the personal needs of the body. Some people may complain that their hands are cold. At the same time, some people are able to keep warm in almost any conditions. Such influences of the body must certainly be taken into account.

The level of thermal savings always depends on the type of external material, the type and amount of insulation, and the characteristics of the membrane. It is recommended to use a breathable and waterproof membrane. A complete relationship between all characteristics is assumed: dry gloves are able to retain heat, but for dryness, a tendency to “breathe” and circulate air flow is assumed.

In most cases, expensive gloves are capable of full heat retention and maximum protection from the cold. This is explained by the following nuance: more high-quality thermal insulation material is used to create accessories. The opposite situation is also assumed: cool models initially imply an affordable cost of production. For this reason, it is important to abandon cheap models that are not able to identify optimal characteristics and guarantee protection of the wrist and hands from the cold.

Type of outer material used

Nowadays, the use of synthetic materials and genuine leather is expected. What to expect in each case?

Synthetics are used most often. In most cases, external material created on the basis of synthetics successfully demonstrates its abilities. Modern manufacturers try to choose nylon, which is treated with water-repellent impregnation. In places that are initially subject to rapid wear, special materials are sewn for protection. It is important to note that such places are areas of the palms and fingers.

Genuine leather is a proven and reliable material. Most often, modern manufacturers use cow or goat leather, which can be durable and flexible. Genuine leather always surpasses nylon materials in its parameters. For example, the advantages include naturalness and effectiveness in repelling water. If gloves for skis and snowboards are created on the basis of leather, they will certainly acquire the necessary advantages:

waterproof;
ability to retain heat;
wind protection.

Proper care of accessories guarantees long-term use of the purchased gloves.

Features of the membrane used

Focusing on the peculiarities of physics, it can be noted that wet hands freeze in the shortest possible time. During active pastime, the main reason can be the sweat released and the lack of opportunity for air circulation inside the item being worn.

The membrane of any gloves is placed between two layers: outer and insulating. The micropores of the membrane are small in size, but at the same time it is possible for the successful circulation of water vapor (naturally released sweat). The membrane largely determines the waterproofness and breathability of gloves.

Manufacturers try to use a variety of water-repellent materials to create glove membranes for skiers and snowboarders. Modern technologies make it possible to successfully diversify the offered options, each of which deserves some attention:

Gore-Tex is a modern membrane located between the outer and insulating layers. In most cases, this material has the maximum level of water resistance and is pleased with its ability to remove moisture. Gore-Tex has been successfully marketed and used. It is important to note that this material has become the most expensive. If the manufacturer uses Gore-Tex, you can expect the gloves to be high quality but expensive.
Outlast is a thermal insulating material. To create it, absorbent capsules of miniature size are traditionally used. It is assumed that it is possible to maintain thermal balance based on the heat generated. This material has a unique thermoregulatory system, which is characterized by a dynamic structure. Maximum protection against overheating and excess heat is guaranteed. Outlast has recently proven itself to be the best thermostat of the 21st century.

3M Thinsulate is a synthetic insulating material designed to create high-quality sports gloves. The insulation is ready to please with special fibers, which are much smaller in size than any other materials. Special sizes of 3M Thinsulate fibers ensure effective air retention and effective cold weather protection. The material is able to completely fill the free space, thereby eliminating the risk of hypothermia. Moreover, the insulation does not allow cold air to penetrate through the wrists, where at least narrow stripes for cold penetration are most often preserved.
Gloves made with Hipora insulation material exhibit optimal resistance to the penetration of moisture and cold air. As a result, the athlete may not even be afraid of the negative influence of the wind. The difference is usually attributed to the polyurethane coating, which is distinguished by its ability to stretch. The entire coating has small pores, which completely guarantee protection against liquid penetration. At the same time, Hipora allows you to rely on the fact that moisture can evaporate in the shortest possible time and eliminate the risk of hypothermia of the athlete’s hands.
Most modern gloves are still made using polyurethane. This material is water-repellent and breathable. Gloves with a layered membrane or polyurethane coating continue to enjoy a high level of popularity. Moreover, a significant share of the modern market falls on polyurethane gloves, which are waterproof, breathable, and affordable. Many manufacturers are trying to offer their target audience modern gloves created on the basis of polyurethane membranes, genuine leather, and synthetics.
Windstopper is a unique fabric that is created on the basis of polytetrafluoroethylene, fluoropolymer, and Teflon. In each case, a high level of protection of the athlete’s hands from the effects of wind is guaranteed. However, the Windstopper does not provide protection against moisture, because the insulation for the wrist and hands only eliminates the negative effects of wind. In any case, the risk associated with wind is eliminated by high breathability. Your hands will always be warm and amazingly comfortable. When choosing gloves using Windstopper, you can count on minimal thickness of the accessory and easy movements. Despite their reduced thickness, the gloves are ideal for cold and dry areas. It is mandatory that accessories based on Windstopper are treated with a water-repellent repellent, which is standard for soft shell materials. The special Windstopper treatment offers moderate water resistance. The most important thing to remember is that gloves can get wet in heavy rain and are ready to protect only from light rain.

Possibilities of modern thermal insulation of sports gloves

Fans of skis and snowboards should take care of decent thermal insulation of the gloves they use. Moreover, the presence of high-quality thermal insulation is traditionally one of the most important aspects of choosing modern gloves.

Accessories with high-quality thermal insulation guarantee optimal thermal conservation and high-quality breathability. In this case, it is assumed that there is no risk to the shape of the accessory, since the influence on movement is completely eliminated. A fan of alpine skiing or snowboarding has the right to expect decent and safe skiing.

The volume of thermal insulation material should depend on the weather conditions and the degree of heating of the hands during active skating. If desired and possible, you can take care of having several pairs of gloves, because you need to focus on the temperature conditions of skating. It is important to remember the following nuance: if gloves or mittens are thicker than another model, they will not necessarily provide the maximum ability to retain heat.

Down is a high quality material for dry weather. This material is natural, thanks to which it guarantees optimal protection against the cold. Down gloves are ideal for moderately active athletes. If the choice is a combination of down and natural feathers, optimal insulation of hands from the cold is assumed. Unfortunately, we have to take into account an unfavorable nuance: the advantages of natural down are almost impossible to surpass with the other parameters of modern materials if the weather is expected to be dry. However, if the down gets wet, it will take a long time for it to dry properly.
Primaloft is a modern synthetic material based on high-quality microfiber. This material is required in order for the athlete's body to successfully retain heat and conserve existing energy. When choosing Primaloft, you can count on using the best material. In addition, Primaloft exhibits better performance in humid weather. Despite the fact that Primaloft is not as warm as down, the material has additional benefits. In each case, you can count on the ability to maintain optimal circulation, compactness, lack of movement restrictions, and water resistance. Thermal insulation remains at a decent level even after the material gets wet.

Thinsulate is a modern thermal insulation material. It is based on ultra-thin microfibers. As a result of the use of gloves based on Thinsulate, optimal insulating properties are guaranteed to be maintained, despite the minimal volume of the product. Athletes have the right to count on comfort and warmth for their hands, maintaining their dexterity.

Features of the material used for lining gloves

For maximum protection of the hands and wrists from adverse factors, special lining material is required. As a result, a mandatory increase in comfort and heat retention is expected.

Each sports brand uses a unique lining when producing high quality and comfortable gloves. Traditional examples include fleece and natural wool.

In most cases, the lining is created on the basis of a synthetic material that is resistant to effective moisture removal and successfully resists sweat. Subsequently, complete transfer of sweat through the membrane used is assumed. It should be noted that most often artificial materials successfully cope with protecting hands from adverse weather, since they are always produced on the basis of the best modern technologies.

The best option is to use modern gloves with different lining materials. Each model, designed for fans of skis and snowboards, will find its worthy use under certain weather conditions. If desired, you can choose a model of sports gloves with removable layers of lining material.

Features of creating a design for the palm

Most modern models of gloves designed for fans of skiing and snowboarding have special treatment in the areas of the palm where they should contribute to the benefit or protection of the hand, fingers and their tips. These areas help to increase the durability and strength of the product, maximizing the protection of hands from external factors. The material for the palm area is traditionally represented by genuine leather or vinyl. It is important to note that vinyl can please you with its long service life and decent protection for your wrist and hands.

Glove cuff length

Each person independently determines which cuff length is most suitable for him. The main purpose is to prevent snow from getting into the gloves, as well as the jacket, through the wrist line. The long cuff immediately reduces the risk of large amounts of snow getting inside.

Sports gloves with long cuffs are ideal for powder, but they are not recommended for dressier clothing or for walks in the city park. For this reason, not only comfort when skiing or snowboarding is taken into account, but also the activity of using gloves and clothing style features.

models with short cuffs often end at the base of the wrist. It is expected that maximum hand mobility will be maintained. Moreover, the sleeves of the jacket can be over the cuffs of the gloves. This option is ideal if an athlete chooses a jacket with Velcro for adjusting the sleeves;
the long cuffs are able to successfully overlap the sleeves of the jacket, thereby guaranteeing optimal protection against snow. Wrist mobility is expected to be limited, but comfort is still maintained. The athlete independently decides whether the cuffs will overlap the sleeves of the jacket. Of course, the possibility of adjusting the sleeves of the jacket is checked first.

Additional attributes for sports gloves

When boldly choosing gloves for alpine skiing or snowboarding, it is important to pay attention to special features. Whether you can enjoy comfort and convenience depends on these parameters:

articular fingers are made in a curved form. As a result, the athlete holds onto ski poles and lift beams more carefully and better;
zippered pockets. Most often, such pockets are used in isolated cases, since they are designed only for very cold days. Opening the pockets creates optimal conditions for the hands, thanks to which the athlete continues to actively engage in sports. In any case, the zipper allows you to open and fasten the gloves, adjusting the conditions for your hands;
wrist straps. Real straps allow you to securely connect gloves to your wrist and even to your coat. Otherwise, there is a risk of losing the accessory. Expensive gloves have similar straps, as a result of which the risk of losing an accessory is reduced to a minimum level;
system for adjusting the glove cuff. It is assumed that the product can be securely fixed around the wrist. The adjustment ensures that the gloves are secure to use. In most cases, a zipper or a belt with special Velcro is used;
Fans of skiing and snowboarding often experience water running from their nose at low temperatures. In this regard, gloves are often equipped with a special nose wiper. This type of wiper is made from suede or other high-quality material. Its presence always pleases with its convenience and practicality;
mini brush. This pad is made of natural rubber. The mini brush can be placed on your thumb. The main task of such a device is to effectively clean glasses;
filling. Gloves may have special layers on the back and in the areas of the finger joints. Additional layers increase protection from stones, branches, and trees. When choosing special gloves for snowboarding with protection, it is recommended to make sure that there is special filling.

Size and fit

Gloves must be adjusted to a certain size. This determines how comfortable an athlete can feel when skating. Fans of snowboarding and skiing understand that they must exercise maximum concentration on personal sensations, on which the possibility of safe descents depends.

When choosing gloves, it is important to make sure that they can fit securely to your hand. It is assumed that only a small space on the fingertips can be saved. The optimal size does not exceed 0.5 centimeters to create the athlete’s comfort.

The palm must be completely inside the glove. In this case, the wrist should be securely covered with the cuff. At the same time, the parts of the glove should not be tightly compressed if the hand is made into a fist, because otherwise there is a risk of curvature of the finger joints.

Fans of skis and snowboards should remember: modern manufacturers offer special designations and divide products into different sizes. Without fail, the basis is to measure the circumference of the widest part of the arm. Measurements are taken in centimeters and inches.

Brief overview of the pricing policy for gloves

All people who try to learn winter sports understand that financial investments in the purchase of special equipment are inevitable. Despite this, it is extremely important to navigate the pricing policy. The main caveat: mittens are always more expensive than gloves because they are used for warm weather and are made from stylish, expensive materials.

Fans of skis and snowboards should focus on the following financial offers:

The cheapest models cost 15–25 dollars. It is expected that skiing will be possible even in parks. Thermal savings will be minimal. Unfortunately, the cheapest gloves cannot be used in full-fledged mountainous areas at subzero temperatures, because they have a completely different purpose.
Gloves $25-$60. The cost largely depends on how well-known the manufacturer is.
Sports gloves for harsh winters cost $60-$120.

A brief overview of modern manufacturers of gloves for winter sports

In the 21st century, many manufacturers offer high-quality winter and warm gloves for skiers and snowboarders. What options are available?

Level

Level is one of the best and renowned companies that offers high quality sports gloves. Features of manufactured products:

a suede pad located in a convenient area of the gloves allows you to effectively wipe the mask filter to maintain maximum viewing quality;
anatomical shape of the fingers to reduce sensitivity and protect joints and palms;
the presence of a removable inner glove without the need to expose your hands in the cold;
special inserts for the strength of the gloves;
ventilation system to maintain the best level of humidity;
The long cuff protects from snow inside.

However, Level products are not of high quality and will only last a couple of seasons.

Bask

Bask strives to offer high quality gloves at an affordable price. However, the models do not have ventilation holes and devices for wiping the filter of the ski mask, as a result of which skiing becomes more difficult.

Burton

Burton strives to offer high-quality sports gloves that feature advanced Screen Grab Toughgrip technology to successfully use your smartphone's touchscreen without exposing your hands. The use of modern technology guarantees the possibility of maintaining communication at any time of rest.

Fischer is another worthy company. The manufacturer offers special gloves based on high-quality materials with optimal breathability, water resistance, and wind protection. An integrated approach guarantees the creation of decent sports gloves.

By choosing modern and high-quality snowboard gloves with wrist protection, you can count on a worthy purchase and full enjoyment of an active pastime.

Write to us if the article was useful.

Good afternoon

Today I received the long-awaited gloves from Aliexpress.

It so happened that the author discovered the beauty of snowboarding only in the winter of the 2014 season. And as everyone knows: you need to start preparing a good sled in the summer. So the decision was made to order some small sports items for the upcoming ski and snowboard season.

After a long time of picking, the choice fell on these gray gloves, because... The seller promised good quality, coupled with large sizes in stock, as well as a wide selection of shades.

Of course, you could buy gloves either cheaper or more expensive, but who likes the taste and color of felt-tip pens? I love gray and don’t like to overpay, that’s all.

Performance characteristics of gloves - waterproof, GoreTex, XL available, pocket for ski pass in gloves.

Here we need to add one important point: access to the ski lifts occurs through turntables using RFID cards. To pass, you need to touch your card to the reader. Usually the pocket for cards is located on the jacket pocket at the level of the inside of the wrist - the beginning of the forearm.

In practice, the turntables are buried under the snow and the sensors are located at knee level or slightly higher. Thus, in order to touch the reader with your forearm, you have to show miracles of flexibility, which is not very convenient with a wide board of size 172.
And then put the ski pass in the pepper and you're done :)

The parcel did not go long or short: on May 18 they were purchased, on June 16 they were received. I don’t post tracking tracks because... I don’t see much point in them. As usual, we quickly left China and trudged through customs in Yekata. Then the parcel was stuck for 2 weeks without updating the tracking, which was followed by a quick appearance in Novosibirsk.

So: HK post, packaging in black bag:

Inside: OEM manufacturer packaging

Unpack the package:

The color matches: grandfather Liao does not suffer from color blindness and clearly processes comments on the order.

They sit on your hand freely, they sit like family, and that’s good too. Honestly, I doubted that the declared XL would fit; after all, in Asia they treat sizes somewhat differently:

A little about the composition, membranes and other marketing:

Quality: very nice. It so happened that the author’s mother is fond of sewing, knitting and other arts and crafts (which can’t be said about her wife: hello sunshine!) and from childhood she taught her son to understand the quality of sewing things.
And it all starts with the seams, even laying and ends with the material.

And there’s nothing to complain about, it’s made well, there are no protruding threads, the seams are strong, the fittings are normal:

We will pay special attention to the palms and fingers: they are responsible for the athlete’s dryness and jacket:

Everything is fine with them as well. No polyurethane cancer was noticed (there was a sad experience from a branded item, in which, during the 2nd season of wear, the material on the palms and fingers fell off with black scabs)